# Another LED Driver: simple, scalable, controllable

**URL:** <https://forums.kinograph.cc/t/another-led-driver-simple-scalable-controllable/2197>\
**Category:** Machine Design\
**Created:** [October 8, 2021, 6:26pm UTC](https://forums.kinograph.cc/t/another-led-driver-simple-scalable-controllable/2197 "2021-10-08T18:26:56Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![PM490](https://forums.kinograph.cc/user_avatar/forums.kinograph.cc/pm490/32/3176_2.png) [@PM490](https://forums.kinograph.cc/u/PM490)\
**Post date:** [October 17, 2021, 2:04pm UTC](https://forums.kinograph.cc/t/another-led-driver-simple-scalable-controllable/2197/11 "2021-10-17T14:04:07Z")

</div>

Thank you @cpixip.

> [@cpixip](#):
>
> use the raw image data coming from the camera

The workflow that I presently use for capturing uses RAW. Described in this [post](https://forums.kinograph.cc/t/frame-by-frame-stepper-control-arduino-digicamcontrol/2163).

Back to the driver, the good news is that the design performs well, and by its modular nature, if one wishes to do white only or RGB or RGBW is just a matter of building more of these and setting the resistor for the operating current of the particular LED. Thanks again to the exchange of information at this forum, and the insightful discussions, suggestions and feedback.

---

_[View the full topic](https://forums.kinograph.cc/t/another-led-driver-simple-scalable-controllable/2197)._
