# Help with RGB lighting test

**URL:** <https://forums.kinograph.cc/t/help-with-rgb-lighting-test/2136>\
**Category:** Uncategorized\
**Created:** [August 15, 2021, 12:49pm UTC](https://forums.kinograph.cc/t/help-with-rgb-lighting-test/2136 "2021-08-15T12:49:36Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![mjh1709muc](https://forums.kinograph.cc/user_avatar/forums.kinograph.cc/mjh1709muc/32/1900_2.png) [@mjh1709muc](https://forums.kinograph.cc/u/mjh1709muc)\
**Post date:** [August 24, 2021, 4:50pm UTC](https://forums.kinograph.cc/t/help-with-rgb-lighting-test/2136/7 "2021-08-24T16:50:50Z")

</div>

After the decision to go for seperate RGB ligthing i started a little research as i didn’t knew much about the benefits of this design.

i found these links to be interesting:

- [Tri-Color Scanning, Color Negative Film & Color Spaces | by Alexi Maschas | Medium](https://medium.com/@alexi.maschas/color-negative-film-color-spaces-786e1d9903a4)
- [https://discuss.pixls.us/t/digitizing-film-using-dslr-and-rgb-led-lights/18825](https://discuss.pixls.us/t/digitizing-film-using-dslr-and-rgb-led-lights/18825)
- [Appendix&nbsp;B.&nbsp;Color Characteristics of Scanners and Recorders](http://dicomp.arri.de/digital/digital_systems/DIcompanion/apb.html)
- [Chapter&nbsp;3.&nbsp;Scanning](http://dicomp.arri.de/digital/digital_systems/DIcompanion/ch03.html)

My key take aways are (and please correct me if i am wrong):  
ARRI Scanners use RGBI (Infrared), take one or two (HDR) pictures for each color channel. They use a monochromatic sensor. Infrared for dust detection. During the image exposure film, gate, and sensor are locked into position.

For color channel separation it is important to shoot one colour at a time. It is not sufficient to use three leds at once to create “white” light.

The led wavelengths should match the films colour sensitivity peaks.

A monochromatic sensor works best, as it doesn’t have a bayer filter.

I think your approach is generating “white” light with three leds at a time and capturing one image with a bayer sensor. Can this concept really deliver better or same colour quality than the ARRI design or the concept with a high CRI white led? What about bayer sensors an their sensitivity for each colour! Do the leds need to match the bayer sensor rather than the film? I could’t find a discussion on this topic in the forum. I am happy to learn more on this topic.

All the best  
Martin

amazing project by the way …

---

_[View the full topic](https://forums.kinograph.cc/t/help-with-rgb-lighting-test/2136)._
