# My all format scanner

**URL:** <https://forums.kinograph.cc/t/my-all-format-scanner/2531>\
**Category:** Machine Design\
**Created:** [May 2, 2023, 12:24pm UTC](https://forums.kinograph.cc/t/my-all-format-scanner/2531 "2023-05-02T12:24:11Z")\
**Posts on this page:** 1\
**Showing post:** 85

<div class="post-metadata">

**Author:** ![Roland](https://forums.kinograph.cc/letter_avatar_proxy/v4/letter/r/3ab097/32.png) [@Roland](https://forums.kinograph.cc/u/Roland)\
**Post date:** [December 31, 2025, 6:29pm UTC](https://forums.kinograph.cc/t/my-all-format-scanner/2531/85 "2025-12-31T18:29:19Z")

</div>

> [@PM490](#):
>
> Roland, congratulations again on your design. Can you share more information about the motors that you are using? Understand they have built-in drivers, so I would like to understand how many steps per turn setting you are currently using for stop-motion. Thanks

I’m using Nema23 motors, 8 mm shaft, 57-100, 2.5 N·m.

For the motor that drives the film, I’m set to 6400 steps per revolution.  
The other motor is set to 3200 steps per revolution, to get a faster rewind speed.

[https://de.aliexpress.com/item/1005005598264428.html](https://de.aliexpress.com/item/1005005598264428.html)

Happy New Year to everyone! 🎉🥂

---

_[View the full topic](https://forums.kinograph.cc/t/my-all-format-scanner/2531)._