# New HQ Raspberry Pi Camera with C/CS-Mount

**URL:** <https://forums.kinograph.cc/t/new-hq-raspberry-pi-camera-with-c-cs-mount/1736>\
**Category:** Uncategorized\
**Created:** [April 30, 2020, 8:02pm UTC](https://forums.kinograph.cc/t/new-hq-raspberry-pi-camera-with-c-cs-mount/1736 "2020-04-30T20:02:38Z")\
**Posts on this page:** 1\
**Showing post:** 35

<div class="post-metadata">

**Author:** ![cpixip](https://forums.kinograph.cc/user_avatar/forums.kinograph.cc/cpixip/32/852_2.png) [@cpixip](https://forums.kinograph.cc/u/cpixip)\
**Post date:** [May 13, 2021, 11:12am UTC](https://forums.kinograph.cc/t/new-hq-raspberry-pi-camera-with-c-cs-mount/1736/35 "2021-05-13T11:12:48Z")

</div>

Hi @oldSkool - welcome to the Kinograph forums!

I do all my designs by myself, from optics over software to 3d-models. However, I share only what I consider to be a somewhat workable solution. So I won’t release (at this point in time) the design files of my [xyz-slider](https://forums.kinograph.cc/t/hdr-exposure-bracketing/1671/22), as I do not consider this to be a workable design. But, at the bottom of this specific post, you can find at least the .stl-file for the camera-body of the Raspberry Pi HQ cam, in combination with a Schneider Componon-S.

As far as I remember, I did post two core designs of my scanner, namely the integrating sphere and the 3D-printed film gate. I was able to find the [film gate (including stl-files)](https://forums.kinograph.cc/t/v2-dev-milestone-3-lighting/1576/35). If you scroll down a little bit in this thread, you will also find links to the stl-files for the integrating sphere.

---

_[View the full topic](https://forums.kinograph.cc/t/new-hq-raspberry-pi-camera-with-c-cs-mount/1736)._