# Sasquatch 70mm scanner

**URL:** <https://forums.kinograph.cc/t/sasquatch-70mm-scanner/1631>\
**Category:** Research\
**Created:** [January 3, 2020, 9:18pm UTC](https://forums.kinograph.cc/t/sasquatch-70mm-scanner/1631 "2020-01-03T21:18:03Z")\
**Posts on this page:** 1\
**Showing post:** 97

<div class="post-metadata">

**Author:** ![robinojones](https://forums.kinograph.cc/letter_avatar_proxy/v4/letter/r/6a8cbe/32.png) [@robinojones](https://forums.kinograph.cc/u/robinojones)\
**Post date:** [December 2, 2021, 4:04am UTC](https://forums.kinograph.cc/t/sasquatch-70mm-scanner/1631/97 "2021-12-02T04:04:58Z")

</div>

I made a small prototype board and installed some potentiometers - it’s so bright it hurts to glance at it and no flicker.

Code will need to be tweaked to improve the range but at least I can continue working on camera trigger. I got a 2 channel scope today so I can troubleshoot the trigger - the camera was randomly losing perfs, this will allow me to troubleshoot that

@PM490 i looked at the 16bit pwm code you linked but I can’t get it to work with arduino mega. I will look at this again soon as I was busy doing the electronics.

 ![image](https://forums.kinograph.cc/uploads/default/original/2X/a/afb401e06d91a6f2aee289c82d4fe492c7562d7a.jpeg)  
 ![image](https://forums.kinograph.cc/uploads/default/original/2X/f/fb38d594a0704d65ea1905a92e4771db0ff0e592.jpeg)

---

_[View the full topic](https://forums.kinograph.cc/t/sasquatch-70mm-scanner/1631)._